Selection Criteria for Liquid Filling Machines

First Tell us this ! : Liquid Type , Bottle Type , Your Manpower , Desired Output

LIQUID TYPE :

1. Flow : Like Water , OR Syrup , OR Honey
2. Is it sticky ?
3. Does it contain particals while filling
4. Is it Hot or Cold (Ambient Temperature)
5. Does it form foam while filling:
6. Product is seasonal or All season?

Other Details Like

1. Bottle Material : HDPE , Glass , PET - what ?
2. Fill Sizes : 100 ml , 150 ml etc
3. Output per size per day : eg 100 ml 2000 Bottles per day ( If you are beginner & starting new , give us appx projections - fine.
4. Want a Non-touch Process ?
5. Type of Labour available : Skilled / Unskilled ?
6. Manpower : Plenty/ few ?
7. Reqt for new project / existing ; when needing the m/cs ?

Induction Cap Sealing Machines

Usually to keep the bottle leak-proof , Plugs are inserted into the bottle neck , very popularly known as " Inners". These inners are press-fitted. Still after some days some gases leak out from these inners. Hence to seal them air tight , they are sealed by "Heat Seling Machines" These are table top machines with thermostat controlled heaters , which seal the inners to the bottle necks. After this the bottles are capped by capping machines.

To avoid this plugs , plugging & heat sealing , nowadays induction cap sealing machines are used. Here the cap comes with a Wad inserted. After Bottle filling , Cap is applied (With the Wad) and then the bottle passes below the induction cap sealer. It is automatically sealed.Three types of m/cs are available :
1. Hand Held 2. Semi Automatic & 3. Automatic also.